查看显卡是否装好
运行glxinfo | grep rendering
如果显示"direct rendering: Yes",则已安装
1、下载驱动
http://www.nvidia.com/page/home.html
我下载的就是NVIDIA-Linux-x86-100.14.19-pkg1.run这个文件
2、删除原驱动包
sudo apt-get --purge remove nvidia-glx nvidia-glx-new
然后删除 /lib/linux-restricted-modules/2.6.22-14-generic/文件夹下面带有nvidia字样的内容,这里是内核自带的驱动
再检查一下这两个文件是否存在,
/etc/init.d/nvidia-glx
/etc/init.d/nvidia-kernel
如果存在,删除掉。
3、安装要用到的软体
sudo apt-get install build-essential pkg-config xserver-xorg-dev linux-headers-`uname -r`
安装编译包。
4、备份
sudo cp /etc/default/linux-restricted-modules-common \ etc/default/linux-restricted-modules-common.backup
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
5、禁止系统使用默认的驱动
sudo gedit /etc/default/linux-restricted-modules-common
在最后的双引号中添加nv nvidia_new,即把文件中的“”,改成“nv nvidia_new”
如果前面第二步删除完整了其实也可以不用执行这一步。
6、停止GDM进程
sudo /etc/init.d/gdm stop
按Ctrl+Alt+F1,登录后进入第7步。
7、进入下好的驱动所在目录(用ls命令确认文件在不在)
sudo sh NVIDIA-Linux-x86-100.14.19-pkg1.run
安装过程中,
如果提示有旧驱动,询问是否删除旧驱动,选Yes;
如果提示缺少某某模块(modules),询问是否上网下载,选no;
如果提示编译模块,询问是否进行编译,选ok;
如果提示将要修改Xorg.conf,询问是否允许,选Yes;
接下来就是等待安装完成。
8、安装完成就回到终端,重启GDM
sudo /etc/init.d/gdm restart
好了,当看到NV的logo后,安装成功。
如果实在不想看NVIDIA的LOGO,可以修改 /etc/X11/xorg.conf
在Section "Device"中添加Option "NoLogo" "True"
如:
Section "Device"
Identifier "通用显示卡"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
分享到:
相关推荐
关于Orico蓝牙5.0驱动linux版本: 进入目录直接执行:sudo make install INTERFACE=all 即可
Please extract the ZIP file, go to the folder where you...sudo make install Then you can reboot your computer, or you can start using the wireless right away with: sudo modprobe 8188eu 在centos上ok的。
rtl8192eu-linux-driver-kernel-3.14 RTL8192EU Realtek驱动程序,用于Linux内核3.14 注意:可在Rosewill RNX-N180UBE v2 N300无线适配器和TP-Link TL-WN823N上使用 支持Linux内核3.14 在Linux 3.14.38上工作 ...
ubuntu 下的xilinx cable usb 驱动源码包,需要编译安装即可。 详细教程请参考https://blog.csdn.net/qq_16069457/article/details/121269721
existing driver in the Linux 3.13.0 kernel, which is maintained at kernel.org. It is recommened to use the driver there that matches your specific kernel version: www.kernel.org Build instrutions: ...
export DB2_CLI_DRIVER_INSTALL_PATH=$HOME/db2_cli_odbc_driver/odbc_cli/clidriver export LD_LIBRARY_PATH=$HOME/db2_cli_odbc_driver/odbc_cli/clidriver/lib export LIBPATH=$HOME/db2_cli_odbc_driver/odbc...
用于通过USB OTG烧写linux/安卓系统,工具还是比较容易上手的
Linux 3.1.x--4.9 通用~ DM9621ANP网卡驱动如何添加到内核;
此驱动用于Tenda无线网卡的驱动使用,解压后进入主目录,运行命令:sudo ./install.sh安装成功后重新插拔无线网卡即可正常在Linux操作系统的服务器上使用Wi-Fi
此驱动为TL-WN821N在Debian 7 上的驱动源码(kali2.0可用) 不适用于window平台 下载后解压,用终端进入到Makefiles文件目录下,执行: make make install 即可驱动网卡设备
Microsoft ODBC Driver 18 for SQL Server(Linux-debian9-12)离线安装包deb 1.下载后解压,里面包含各版本的odbc驱动,安装前确认匹配当前系统cat /proc/version。 2.Debian默认使用dpkg -i xxx.deb安装,若提示缺少...
This driver supports most Motorola OS, Motorola Linux OS, Motorola iDEN, Motorola Symbian/UIQ, Motorola Windows Mobile® and Motorola i-Mode handsets. System Requirements A 64-bit version of Windows ...
$ cd rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202/driver $ tar -zxf rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202.tar.gz $ cd rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100202 $ ...
Linux驱动程序Asus PCE-N53(Ralink RT5592芯片组) 由于提供的Asus PCE-N53驱动程序是针对非常老Linux内核(2.8之前的版本),因此我选择了社区补丁,并进行了必要的进一步更改,以打包运行该卡或类似芯片组所需的...
Any distribution shipping a kernel >= 2.6.27 will have ath9k present but the ath9k driver on 2.6.32 is the oldest one recommended, anything older than that is completely unsupported. Below is a list ...
建议使用 install-driver.sh 进行操作安装,内核更新后不会丢失。也可以使用 make;make install 进行安装。安装过程中如缺少 dkms 等软件包,请先安装。安装完成后需要重新启动机器,启动后使用 lsmod | grep 8821 ...
To install the driver source: 1. Copy the file rtc-rx8130.c into the directory ./linux-3.8.x/drivers/rtc. "linux-3.8.x" refers to the base of the linux kernel source tree. 2. Add the following lines ...
Ubuntu18.04亲测可用。 解压后执行 make make install 再插上USB设备,重启即可找到wifi设备
2009-09-15 发布 摩托罗拉官方USB驱动文件, 支持全系列摩托手机. 开发接口及软件,拨号等必须 September 15, 2009 Motorola USB Driver v4.0.0 ...You must have Administrator permissions to install this driver
ES9028控制器Linux驱动程序安装手册设置编译环境获取内核源安装“ rpi-source”软件。 “ rpi-source”命令自动下载与正在运行Linux内核版本匹配的内核源。 安装: sudo wget ...